Skip to content

Blog

How to do a HIPAA risk assessment in a dental practice

Cover graphic reading How to do a HIPAA risk assessment in a dental practice

If your practice has never done a HIPAA risk assessment, or the last one is a binder from a few years ago, it's the single most useful compliance task you can do this year. It's also the one federal regulators keep asking for first.

The HHS Office for Civil Rights runs a Risk Analysis Initiative aimed at organizations that never did one properly. By mid-2026 it had reached 14 enforcement actions, and every one of them cited the same failure: no accurate, thorough, documented risk analysis. Most of those cases started with a breach report. The risk analysis was the thing investigators asked for next.

Here's what the assessment actually is, how a dental office can get through it, and where your IT provider should be helping.

What a risk assessment is (and isn't)

The HIPAA Security Rule requires every practice to do an "accurate and thorough assessment of the potential risks and vulnerabilities" to the electronic patient information it holds. In plain terms, you write down:

  • Where patient information lives
  • What could go wrong with it
  • How likely that is and how bad it would be
  • What you already do about it, and what you'll do next

It isn't a certificate, and nobody passes or fails it. It's a working document that shows you looked honestly at your practice and made a plan. A short, specific assessment you actually follow is worth more than a thick generic one.

HHS doesn't set a fixed schedule for it. A sensible habit is to review it at least once a year and again whenever something big changes, like a new server, a move to cloud software, a new location or a breach.

Step 1: Find every place patient data lives

This is where most dental practices come up short, because patient information spreads further than people expect. Walk through the office and list:

  • The server, or the cloud service, that runs your practice management software
  • Imaging: sensors, the pano or CBCT unit and the computer that drives it, intraoral scanners and where the images are stored
  • Front desk and operatory computers, and any laptops that go home
  • Email, including the mailbox where referrals, lab slips and insurance correspondence arrive
  • Backups, wherever they are kept
  • Phones and voicemail, texting and reminder services, online forms and payment systems
  • Paper: charts, the scanner tray, the printer's memory

Don't forget the vendors. Your practice software company, imaging vendor, reminder service, clearinghouse and IT provider may all touch patient data, and each should have a business associate agreement with you.

Step 2: Ask what could go wrong

For each place on your list, think through the realistic threats. In dental offices, the same few come up again and again:

  • A taken-over email account. Someone at the practice, or at a lab or supplier you trust, falls for a fake sign-in page.
  • Ransomware. It often gets in through remote access tools or a stolen password, then goes after the server and the backups.
  • Lost or stolen devices. A laptop in a car or a USB drive with exported records.
  • Old computers. Machines that no longer get security updates, including the one tied to an imaging unit.
  • Insiders. Shared logins, ex-employees whose access was never shut off, or curiosity about a neighbor's chart.
  • Plain bad luck. A failed server, a burst pipe, a power surge.

Step 3: Rate the risks and check your safeguards

For each threat, note how likely it is and how much damage it would do, then write down what's already in place. Multi-factor sign-in on email, security monitoring on every computer, encryption on laptops, separate Wi-Fi for patients, off-site backups that get test restores. Those are the kinds of safeguards an investigator will look for.

Be honest here. "We think the backups work" is a finding, not a safeguard.

Step 4: Write the plan and keep the paperwork

The output is a short list of what you'll fix, who owns it and roughly when. Keep the assessment, the plan and proof of what you did (dated) for at least six years, which is how long HIPAA expects documentation to be kept.

The free HHS tool

You don't need to buy software to do this. HHS publishes a free Security Risk Assessment Tool for small and medium practices, as a Windows application and as an Excel workbook. It walks you through multiple-choice questions and produces a report you can keep.

Version 3.7 came out in September 2026. It adds questions about remote access and working from home, a scope question that covers every location where you create, receive or store patient information, and a more modern asset inventory. HHS is clear that using the tool doesn't by itself make you compliant. It's a structure for the work, not a substitute for it.

Where your IT provider fits

The risk assessment belongs to your practice. Someone in your office should own it and sign off on it. But much of what goes into it is technical, and that's where your IT provider should be doing real work, not just handing you a form.

At a minimum, your IT provider should be able to give you:

  • A current list of every computer, server and network device, with its age and whether it still gets updates
  • Where patient data is stored and how it's backed up, including the last successful test restore
  • Which security tools run on each machine, and how email and remote access are protected
  • A signed business associate agreement

If you ask for that list and it takes weeks to arrive, or never does, that tells you something about how well your systems are being managed.

A good place to start

If the whole thing feels like too much, start with step 1. A complete list of where your patient data lives makes every other step easier, and it's often the first thing an investigator asks for. Set aside an afternoon with your office manager and your IT provider, walk the office, and write it down.